Chemical Bunds
Treatment plants and dosing plants need to store harsh chemical in bunded areas. Hychem has a range of chemical resistant coatings including for 98% sulphuric acid.
Repair, rehabilitate, coat and protect to stop corrosion. Increase asset life span with our range of specialist products below:
Products
- TL9 – HYCHEM TL9 is a flake filled novolac epoxy coating with excellent chemical resistance to a wide range of chemicals varying from mineral acids to hydrocarbons, caustic solutions and aqueous salts. It has been specifically formulated for resistance to 98% sulphuric acid but is also suited to 40% phosphoric, 30% hydrochloric and 20% nitric acid solutions. A proven versatile system for areas of chemical exposure, offering protection from a broad range of acids and chemicals. A unique flake additive provides the ultimate in protection.
- TL6 – Water potable epoxy coating. Add 500ml epoxy pigment – Hychem TL6 is a specialised water potable coating suited to a large range of applications. TL6 can be roller applied to vertical and horizontal substrates including concrete and steel. TL6 is a high-build, multipurpose, solventless epoxy coating exhibiting a chemically resistant high gloss stippled finish. Hychem TL6 is suited to water potable environments. It conforms to to AS/NZS 4020/2005 testing of products for use in contact with drinking water.
- TL5 EPL – HYCHEM TL5 EPL is a chemically resistant high-build epoxy coating designed for use in environments where exposure to water, salt solutions, alkali and dilute mineral acids is required. The product is designed for applications of up to 6mm+ using wet on wet spray technique, but can also be trowelled in small areas where spray application is unsuitable. HYCHEM TL5 EPL is based on the same resin as HYCHEM TL5 but uses a slower hardener system to allow a longer work time. This change in hardener results in equally good sulphuric acid resistance compared to TL5.
- Polyac 12: Quick – Hardening resin for priming of dry concrete, bricks, tiles and other mineral floors.
- Polyac 14: Quick – Curing resin for priming slightly damaged concrete floors, floors with small cracks, asphalt and bitumous membranes
- Polyac 18: Polyac 18 is used for damp or new concrete substrates
- Polyac 62: Polyac 62 is a Hard Sealer Top Coat for PolyacFlooring Systems, with the highest UV & Chemical resistance. Polyac 62 is transparent & can be coloured with Micronised Pigments. Impermeable Top Coat with excellent adhesion & high mechanical & wearing resistance.
Repair, rehabilitate, coat and protect to stop corrosion. Increase asset life span with our range of specialist products below:
Products
- TL9 – HYCHEM TL9 is a flake filled novolac epoxy coating with excellent chemical resistance to a wide range of chemicals varying from mineral acids to hydrocarbons, caustic solutions and aqueous salts. It has been specifically formulated for resistance to 98% sulphuric acid but is also suited to 40% phosphoric, 30% hydrochloric and 20% nitric acid solutions. A proven versatile system for areas of chemical exposure, offering protection from a broad range of acids and chemicals. A unique flake additive provides the ultimate in protection.
- TL6 – Water potable epoxy coating. Add 500ml epoxy pigment – Hychem TL6 is a specialised water potable coating suited to a large range of applications. TL6 can be roller applied to vertical and horizontal substrates including concrete and steel. TL6 is a high-build, multipurpose, solventless epoxy coating exhibiting a chemically resistant high gloss stippled finish. Hychem TL6 is suited to water potable environments. It conforms to to AS/NZS 4020/2005 testing of products for use in contact with drinking water.
- TL5 EPL – HYCHEM TL5 EPL is a chemically resistant high-build epoxy coating designed for use in environments where exposure to water, salt solutions, alkali and dilute mineral acids is required. The product is designed for applications of up to 6mm+ using wet on wet spray technique, but can also be trowelled in small areas where spray application is unsuitable. HYCHEM TL5 EPL is based on the same resin as HYCHEM TL5 but uses a slower hardener system to allow a longer work time. This change in hardener results in equally good sulphuric acid resistance compared to TL5.
- Polyac 12: Quick – Hardening resin for priming of dry concrete, bricks, tiles and other mineral floors.
- Polyac 14: Quick – Curing resin for priming slightly damaged concrete floors, floors with small cracks, asphalt and bitumous membranes
- Polyac 18: Polyac 18 is used for damp or new concrete substrates
- Polyac 62: Polyac 62 is a Hard Sealer Top Coat for PolyacFlooring Systems, with the highest UV & Chemical resistance. Polyac 62 is transparent & can be coloured with Micronised Pigments. Impermeable Top Coat with excellent adhesion & high mechanical & wearing resistance.