Wet wells
Wet well structures are subject to H2S corrosion and require a fast curing chemically resistant coating to prolong life. Spetec PU injection resins can be used for infiltration.
Repair, rehabilitate, coat and protect to stop corrosion. Increase asset life span with our range of specialist products below:
Products
- E500P – HYCHEM E500P is designed as a pore filling primer to be used in conjunction with high build epoxy coatings and toppings to inhibit gassing of the high build product due to thermal movement of air between the substrate and the air space. This pore filling action is essential when the surface is to becoated with Hychem TL5.
- E500T – HYCHEM E500T is designed to be used as fairing mortar for application to prepared concrete surfaces which are to be coated with a protective coating. The product is used for the filling and sealing of small holes formed by the removal of cement paste during water blasting and other surface preparation methods. Hychem E500T can also be used as a general purpose patching compound for rendering or making good the surface prior to theapplication of a protective top coat.
- TL5 EPL – HYCHEM TL5 EPL is a chemically resistant high-build epoxy coating designed for use in environments where exposure to water, salt solutions, alkali and dilute mineral acids is required. The product is designed for applications of up to 6mm+ using wet on wet spray technique, but can also be trowelled in small areas where spray application is unsuitable. HYCHEM TL5 EPL is based on the same resin as HYCHEM TL5 but uses a slower hardener system to allow a longer work time. This change in hardener results in equally good sulphuric acid resistance compared to TL5.
- Spetec PUH100: One component, closed cell, hydrophobic, water reactive, phthalate free, low viscosity polyurethane injection resin for stabilisation and water cut-off of large water leaks. In contact with water the SPETEC® STOP H100 will expand and set as a permanent water seal inside the crack or joint.
- GT350
- SR207 – VELOSIT SR 207 is a Sulphate-resistant, structural grade cementitious repair mortar for concrete restoration acc. to EN 1504-9. It is used to fill large voids or build up larger cross-sections up to 100 mm specifically designed for repairs in sewage and waste water structures.
Repair, rehabilitate, coat and protect to stop corrosion. Increase asset life span with our range of specialist products below:
Products
- E500P – HYCHEM E500P is designed as a pore filling primer to be used in conjunction with high build epoxy coatings and toppings to inhibit gassing of the high build product due to thermal movement of air between the substrate and the air space. This pore filling action is essential when the surface is to becoated with Hychem TL5.
- E500T – HYCHEM E500T is designed to be used as fairing mortar for application to prepared concrete surfaces which are to be coated with a protective coating. The product is used for the filling and sealing of small holes formed by the removal of cement paste during water blasting and other surface preparation methods. Hychem E500T can also be used as a general purpose patching compound for rendering or making good the surface prior to theapplication of a protective top coat.
- TL5 EPL – HYCHEM TL5 EPL is a chemically resistant high-build epoxy coating designed for use in environments where exposure to water, salt solutions, alkali and dilute mineral acids is required. The product is designed for applications of up to 6mm+ using wet on wet spray technique, but can also be trowelled in small areas where spray application is unsuitable. HYCHEM TL5 EPL is based on the same resin as HYCHEM TL5 but uses a slower hardener system to allow a longer work time. This change in hardener results in equally good sulphuric acid resistance compared to TL5.
- Spetec PUH100: One component, closed cell, hydrophobic, water reactive, phthalate free, low viscosity polyurethane injection resin for stabilisation and water cut-off of large water leaks. In contact with water the SPETEC® STOP H100 will expand and set as a permanent water seal inside the crack or joint.
- GT350
- SR207 – VELOSIT SR 207 is a Sulphate-resistant, structural grade cementitious repair mortar for concrete restoration acc. to EN 1504-9. It is used to fill large voids or build up larger cross-sections up to 100 mm specifically designed for repairs in sewage and waste water structures.